Ne suivez pas ce lien ou vous tomberez dans un trou noir et vous serez banni du site. Ne suivez pas ce lien ou vous tomberez dans un trou noir et vous serez banni du site.
  Un technicien de l'atelier ASUS en direct :  08 90 21 38 48  (0,80c/min)
Barre latérale

HELP ! BSOD sur ROG GL752VW



Un support gratuit dans les Forums


Les forums

Une question sur votre matériel ?

Créer une discussion


Nos services de réparation professionnels


L'atelier ASUS

Diagnostic et devis en ligne gratuits

 Ouvrir un ticket

Vos pièces détachées certifiées Asus


Pièces détachées

Officielles, neuves et garanties

 Trouver une pièce

0 personne(s) consulte(nt) ce sujet : 0 membre(s) et 0 invité(s).

 Je "TIP" ce support

M

Manbo49

Re !
Donc je n'ai pas encore retester car j'ai pas eu le temps d'aller checher dans mes tiroirs ma vieille manette de ps lol... mais j'ai peu d'inquietude quand à l'issue de ce test. En effet, sous windows, lorsque le pc finissait par se lancer et se stabiliser, j'ai pu jouer snas problemes ni bugs et a des jeux bien plus recents et demandant de la ressource comme les derniers assassin's creed...

Du coup si c pas la carte graphique quelle autre piste de test je peux avoir ? Alimentation ? Logiciel ? OS ?


Envoyé de mon iPad en utilisant l\'application Forum des portables
 


alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Re,

Vraiment difficile à savoir, au début je pensais que c'était ta carte graphique, on va faire ce qu'a demandé milediou, à savoir les résultats de :




Suffit de taper ceci dans un terminal en mode root :
Code:
cat /var/log/syslog

Code:
dmesg

J'aurai rajouté aussi:

Code: 
 journalctl
Bien que sur ta version de Ubuntu, je pense que tu auras les mêmes résultats que dmesg.


Enfin, il ne faut pas oublier que tu utilisais un crack, loin de te faire la morale, il faut savoir, que selon le crack que tu utilises, certains peuvent ouvrir un accès caché à ton ordinateur, et peuvent prendre contrôle de ton ordinateur.

www.forum-des-portables-asus.fr: Wiki - cracks, keygens et KMS.pico : vos données sont menacées | Le forum des portables Asus

L'époque quand une infection pouvait être supprimé en formatant le disque dur, et pour les plus sophistiquées, il fallait écraser le MBR , et\ou supprimer les derniers secteurs du disque dur physique est terminé , maintenant cela peut passer par l'infection du matériel en lui-même, et les alentours (routeurs; ordinateurs, etc...)

Avec des "pirates" de plus en plus spécialisés, on peut carrément toucher le matériel, par exemple il a été révélé pas si longtemps que certaines entités avaient des failles pour infecter l'EFI des macs.

Je suis en train de travailler dessus pour essayer de détecter ce genre d'infection, via cette page, mais cela prend du temps

Cordialement
 
M

Manbo49

Salut !

Voici le DMESG :

Code: 
dmesg
 
[	0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22
 
[	0.000000] Linux version 4.10.0-19-generic (buildd@lcy01-13) (gcc version 6.3.0 20170321 (Ubuntu 6.3.0-10ubuntu1) ) #21-Ubuntu SMP Thu Apr 6 17:04:57 UTC 2017 (Ubuntu 4.10.0-19.21-generic 4.10.8)
 
[	0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-19-generic.efi.signed root=UUID=8d81c4c7-6c89-4c0c-90d1-fde21a81465c ro quiet splash vt.handoff=7
 
[	0.000000] KERNEL supported cpus:
 
[	0.000000]   Intel GenuineIntel
 
[	0.000000]   AMD AuthenticAMD
 
[	0.000000]   Centaur CentaurHauls
 
[	0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
 
[	0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
 
[	0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
 
[	0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
 
[	0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
 
[	0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
 
[	0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
 
[	0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
 
[	0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
 
[	0.000000] e820: BIOS-provided physical RAM map:
 
[	0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
 
[	0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
 
[	0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
 
[	0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
 
[	0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007248ffff] usable
 
[	0.000000] BIOS-e820: [mem 0x0000000072490000-0x0000000072490fff] ACPI NVS
 
[	0.000000] BIOS-e820: [mem 0x0000000072491000-0x00000000724dafff] reserved
 
[	0.000000] BIOS-e820: [mem 0x00000000724db000-0x000000007252cfff] usable
 
[	0.000000] BIOS-e820: [mem 0x000000007252d000-0x000000007296dfff] reserved
 
[	0.000000] BIOS-e820: [mem 0x000000007296e000-0x00000000758d9fff] usable
 
[	0.000000] BIOS-e820: [mem 0x00000000758da000-0x0000000076368fff] reserved
 
[	0.000000] BIOS-e820: [mem 0x0000000076369000-0x0000000076982fff] usable
 
[	0.000000] BIOS-e820: [mem 0x0000000076983000-0x0000000077326fff] ACPI NVS
 
[	0.000000] BIOS-e820: [mem 0x0000000077327000-0x0000000077f08fff] reserved
 
[	0.000000] BIOS-e820: [mem 0x0000000077f09000-0x0000000077f7efff] type 20
 
[	0.000000] BIOS-e820: [mem 0x0000000077f7f000-0x0000000077ffefff] usable
 
[	0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
 
[	0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
 
[	0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
 
[	0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
 
[	0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
 
[	0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
 
[	0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000283ffffff] usable
 
[	0.000000] NX (Execute Disable) protection: active
 
[	0.000000] efi: EFI v2.40 by American Megatrends
 
[	0.000000] efi:  ESRT=0x77e47e18  ACPI=0x76a8b000  ACPI 2.0=0x76a8b000  SMBIOS=0x77861000  SMBIOS 3.0=0x77860000
 
[	0.000000] SMBIOS 3.0.0 present.
 
[	0.000000] DMI: ASUSTeK COMPUTER INC. GL752VW/GL752VW, BIOS GL752VW.214 04/18/2016
 
[	0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
 
[	0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
 
[	0.000000] e820: last_pfn = 0x284000 max_arch_pfn = 0x400000000
 
[	0.000000] MTRR default type: write-back
 
[	0.000000] MTRR fixed ranges enabled:
 
[	0.000000]   00000-9FFFF write-back
 
[	0.000000]   A0000-BFFFF uncachable
 
[	0.000000]   C0000-FFFFF write-protect
 
[	0.000000] MTRR variable ranges enabled:
 
[	0.000000]   0 base 0080000000 mask 7F80000000 uncachable
 
[	0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
 
[	0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
 
[	0.000000]   3 base 0079000000 mask 7FFF000000 uncachable
 
[	0.000000]   4 base 0078800000 mask 7FFF800000 uncachable
 
[	0.000000]   5 disabled
 
[	0.000000]   6 disabled
 
[	0.000000]   7 disabled
 
[	0.000000]   8 disabled
 
[	0.000000]   9 disabled
 
[	0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
 
[	0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000
 
[	0.000000] esrt: Reserving ESRT space from 0x0000000077e47e18 to 0x0000000077e47e50.
 
[	0.000000] Scanning 1 areas for low memory corruption
 
[	0.000000] Base memory trampoline at [ffff9e4480097000] 97000 size 24576
 
[	0.000000] Using GB pages for direct mapping
 
[	0.000000] BRK [0x30228000, 0x30228fff] PGTABLE
 
[	0.000000] BRK [0x30229000, 0x30229fff] PGTABLE
 
[	0.000000] BRK [0x3022a000, 0x3022afff] PGTABLE
 
[	0.000000] BRK [0x3022b000, 0x3022bfff] PGTABLE
 
[	0.000000] BRK [0x3022c000, 0x3022cfff] PGTABLE
 
[	0.000000] BRK [0x3022d000, 0x3022dfff] PGTABLE
 
[	0.000000] BRK [0x3022e000, 0x3022efff] PGTABLE
 
[	0.000000] BRK [0x3022f000, 0x3022ffff] PGTABLE
 
[	0.000000] BRK [0x30230000, 0x30230fff] PGTABLE
 
[	0.000000] BRK [0x30231000, 0x30231fff] PGTABLE
 
[	0.000000] RAMDISK: [mem 0x32177000-0x350b2fff]
 
[	0.000000] ACPI: Early table checksum verification disabled
 
[	0.000000] ACPI: RSDP 0x0000000076A8B000 000024 (v02 _ASUS_)
 
[	0.000000] ACPI: XSDT 0x0000000076A8B0A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
 
[	0.000000] ACPI: FACP 0x0000000076AB0C98 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
 
[	0.000000] ACPI: DSDT 0x0000000076A8B210 025A85 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
 
[	0.000000] ACPI: FACS 0x0000000077325F80 000040
 
[	0.000000] ACPI: APIC 0x0000000076AB0DA8 0000BC (v03 _ASUS_ Notebook 01072009 AMI  00010013)
 
[	0.000000] ACPI: FPDT 0x0000000076AB0E68 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
 
[	0.000000] ACPI: FIDT 0x0000000076AB0EB0 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
 
[	0.000000] ACPI: MCFG 0x0000000076AB0F50 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
 
[	0.000000] ACPI: HPET 0x0000000076AB0F90 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
 
[	0.000000] ACPI: SSDT 0x0000000076AB0FC8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
 
[	0.000000] ACPI: ECDT 0x0000000076AB12E0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
 
[	0.000000] ACPI: LPIT 0x0000000076AB13A8 000094 (v01 INTEL  SKL	  00000000 MSFT 0000005F)
 
[	0.000000] ACPI: SSDT 0x0000000076AB1440 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
 
[	0.000000] ACPI: DBGP 0x0000000076AB1688 000034 (v01 INTEL		   00000000 MSFT 0000005F)
 
[	0.000000] ACPI: DBG2 0x0000000076AB16C0 000054 (v00 INTEL		   00000000 MSFT 0000005F)
 
[	0.000000] ACPI: SSDT 0x0000000076AB1718 003D2D (v02 DptfTa DptfTabl 00001000 INTL 20120913)
 
[	0.000000] ACPI: SSDT 0x0000000076AB5448 006685 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
 
[	0.000000] ACPI: UEFI 0x0000000076ABBAD0 000042 (v01				 00000000	  00000000)
 
[	0.000000] ACPI: SSDT 0x0000000076ABBB18 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
 
[	0.000000] ACPI: BGRT 0x0000000076ABC970 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
 
[	0.000000] ACPI: SSDT 0x0000000076ABC9A8 0000A5 (v02 SgRef  SgPeg	00001000 INTL 20120913)
 
[	0.000000] ACPI: DMAR 0x0000000076ABCA50 0000F0 (v01 INTEL  SKL	  00000001 INTL 00000001)
 
[	0.000000] ACPI: TPM2 0x0000000076ABCB40 000034 (v03		Tpm2Tabl 00000001 AMI  00000000)
 
[	0.000000] ACPI: SSDT 0x0000000076ABCB78 001A3F (v01 OptRef OptTabl  00001000 INTL 20120913)
 
[	0.000000] ACPI: MSDM 0x0000000076102F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
 
[	0.000000] ACPI: Local APIC address 0xfee00000
 
[	0.000000] No NUMA configuration found
 
[	0.000000] Faking a node at [mem 0x0000000000000000-0x0000000283ffffff]
 
[	0.000000] NODE_DATA(0) allocated [mem 0x283fd3000-0x283ffdfff]
 
[	0.000000] Zone ranges:
 
[	0.000000]   DMA	  [mem 0x0000000000001000-0x0000000000ffffff]
 
[	0.000000]   DMA32	[mem 0x0000000001000000-0x00000000ffffffff]
 
[	0.000000]   Normal   [mem 0x0000000100000000-0x0000000283ffffff]
 
[	0.000000]   Device   empty
 
[	0.000000] Movable zone start for each node
 
[	0.000000] Early memory node ranges
 
[	0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
 
[	0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
 
[	0.000000]   node   0: [mem 0x0000000000100000-0x000000007248ffff]
 
[	0.000000]   node   0: [mem 0x00000000724db000-0x000000007252cfff]
 
[	0.000000]   node   0: [mem 0x000000007296e000-0x00000000758d9fff]
 
[	0.000000]   node   0: [mem 0x0000000076369000-0x0000000076982fff]
 
[	0.000000]   node   0: [mem 0x0000000077f7f000-0x0000000077ffefff]
 
[	0.000000]   node   0: [mem 0x0000000100000000-0x0000000283ffffff]
 
[	0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000283ffffff]
 
[	0.000000] On node 0 totalpages: 2071172
 
[	0.000000]   DMA zone: 64 pages used for memmap
 
[	0.000000]   DMA zone: 23 pages reserved
 
[	0.000000]   DMA zone: 3996 pages, LIFO batch:0
 
[	0.000000]   DMA32 zone: 7468 pages used for memmap
 
[	0.000000]   DMA32 zone: 477928 pages, LIFO batch:31
 
[	0.000000]   Normal zone: 24832 pages used for memmap
 
[	0.000000]   Normal zone: 1589248 pages, LIFO batch:31
 
[	0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007affffff
 
[	0.000000] ACPI: PM-Timer IO Port: 0x1808
 
[	0.000000] ACPI: Local APIC address 0xfee00000
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
 
[	0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
 
[	0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
 
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
 
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
 
[	0.000000] ACPI: IRQ0 used by override.
 
[	0.000000] ACPI: IRQ9 used by override.
 
[	0.000000] Using ACPI (MADT) for SMP configuration information
 
[	0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
 
[	0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
 
[	0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x72490000-0x72490fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x72491000-0x724dafff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x7252d000-0x7296dfff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x758da000-0x76368fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x76983000-0x77326fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x77327000-0x77f08fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x77f09000-0x77f7efff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7affffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0x7b000000-0xdfffffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
 
[	0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
 
[	0.000000] e820: [mem 0x7b000000-0xdfffffff] available for PCI devices
 
[	0.000000] Booting paravirtualized kernel on bare hardware
 
[	0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
 
[	0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
 
[	0.000000] percpu: Embedded 36 pages/cpu @ffff9e4703c00000 s107800 r8192 d31464 u262144
 
[	0.000000] pcpu-alloc: s107800 r8192 d31464 u262144 alloc=1*2097152
 
[	0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
 
[	0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2038785
 
[	0.000000] Policy zone: Normal
 
[	0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-19-generic.efi.signed root=UUID=8d81c4c7-6c89-4c0c-90d1-fde21a81465c ro quiet splash vt.handoff=7
 
[	0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
 
[	0.000000] Calgary: detecting Calgary via BIOS EBDA area
 
[	0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
 
[	0.000000] Memory: 7954140K/8284688K available (9061K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 330548K reserved, 0K cma-reserved)
 
[	0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
 
[	0.000000] Hierarchical RCU implementation.
 
[	0.000000]	 Build-time adjustment of leaf fanout to 64.
 
[	0.000000]	 RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
 
[	0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
 
[	0.000000] NR_IRQS:524544 nr_irqs:2048 16
 
[	0.000000] vt handoff: transparent VT on vt#7
 
[	0.000000] Console: colour dummy device 80x25
 
[	0.000000] console [tty0] enabled
 
[	0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
 
[	0.000000] hpet clockevent registered
 
[	0.000000] tsc: Detected 2600.000 MHz processor
 
[	0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
 
[	0.000021] pid_max: default: 32768 minimum: 301
 
[	0.000027] ACPI: Core revision 20160930
 
[	0.032982] ACPI: 8 ACPI AML tables successfully acquired and loaded
 
[	0.034131] Security Framework initialized
 
[	0.034132] Yama: becoming mindful.
 
[	0.034143] AppArmor: AppArmor initialized
 
[	0.034464] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
 
[	0.035699] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
 
[	0.036275] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
 
[	0.036281] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
 
[	0.036475] CPU: Physical Processor ID: 0
 
[	0.036475] CPU: Processor Core ID: 0
 
[	0.036478] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
 
[	0.036478] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
 
[	0.036482] mce: CPU supports 10 MCE banks
 
[	0.036489] CPU0: Thermal monitoring enabled (TM1)
 
[	0.036503] process: using mwait in idle threads
 
[	0.036505] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
 
[	0.036505] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
 
[	0.036600] Freeing SMP alternatives memory: 32K
 
[	0.040169] ftrace: allocating 34175 entries in 134 pages
 
[	0.052143] smpboot: Max logical packages: 2
 
[	0.052146] DMAR: Host address width 39
 
[	0.052147] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
 
[	0.052152] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
 
[	0.052153] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
 
[	0.052155] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
 
[	0.052156] DMAR: RMRR base: 0x000000760e2000 end: 0x00000076101fff
 
[	0.052157] DMAR: RMRR base: 0x00000078800000 end: 0x0000007affffff
 
[	0.052157] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
 
[	0.052158] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
 
[	0.052159] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
 
[	0.052159] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
 
[	0.052160] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
 
[	0.052160] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
 
[	0.053569] DMAR-IR: Enabled IRQ remapping in xapic mode
 
[	0.053570] x2apic: IRQ remapping doesn't support X2APIC mode
 
[	0.057641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
 
[	0.097331] TSC deadline timer enabled
 
[	0.097336] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
 
[	0.097370] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
 
[	0.097392] ... version:				4
 
[	0.097392] ... bit width:			  48
 
[	0.097393] ... generic registers:	  4
 
[	0.097393] ... value mask:			 0000ffffffffffff
 
[	0.097394] ... max period:			 00007fffffffffff
 
[	0.097394] ... fixed-purpose events:   3
 
[	0.097394] ... event mask:			 000000070000000f
 
[	0.098038] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 
[	0.098058] smp: Bringing up secondary CPUs ...
 
[	0.098105] x86: Booting SMP configuration:
 
[	0.098106] .... node  #0, CPUs:	  #1 #2 #3 #4 #5 #6 #7
 
[	0.107982] smp: Brought up 1 node, 8 CPUs
 
[	0.107984] smpboot: Total of 8 processors activated (41472.00 BogoMIPS)
 
[	0.113886] devtmpfs: initialized
 
[	0.113926] x86/mm: Memory block size: 128MB
 
[	0.115323] evm: security.selinux
 
[	0.115324] evm: security.SMACK64
 
[	0.115324] evm: security.SMACK64EXEC
 
[	0.115324] evm: security.SMACK64TRANSMUTE
 
[	0.115325] evm: security.SMACK64MMAP
 
[	0.115325] evm: security.ima
 
[	0.115325] evm: security.capability
 
[	0.115366] PM: Registering ACPI NVS region [mem 0x72490000-0x72490fff] (4096 bytes)
 
[	0.115367] PM: Registering ACPI NVS region [mem 0x76983000-0x77326fff] (10108928 bytes)
 
[	0.115499] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 
[	0.115507] futex hash table entries: 2048 (order: 5, 131072 bytes)
 
[	0.115549] pinctrl core: initialized pinctrl subsystem
 
[	0.115693] RTC time:  7:40:20, date: 04/24/17
 
[	0.116518] NET: Registered protocol family 16
 
[	0.129607] cpuidle: using governor ladder
 
[	0.145619] cpuidle: using governor menu
 
[	0.145621] PCCT header not found.
 
[	0.145728] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
 
[	0.145729] ACPI: bus type PCI registered
 
[	0.145732] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
 
[	0.145804] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
 
[	0.145806] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
 
[	0.145816] PCI: Using configuration type 1 for base access
 
[	0.165819] HugeTLB registered 1 GB page size, pre-allocated 0 pages
 
[	0.165820] HugeTLB registered 2 MB page size, pre-allocated 0 pages
 
[	0.165995] ACPI: Added _OSI(Module Device)
 
[	0.165996] ACPI: Added _OSI(Processor Device)
 
[	0.165997] ACPI: Added _OSI(3.0 _SCP Extensions)
 
[	0.165997] ACPI: Added _OSI(Processor Aggregator Device)
 
[	0.165999] ACPI : EC: EC started
 
[	0.167686] ACPI: \: Used as first EC
 
[	0.167687] ACPI: \: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
 
[	0.167688] ACPI: \: Used as boot ECDT EC to handle transactions
 
[	0.168681] ACPI: Executed 22 blocks of module-level executable AML code
 
[	0.178686] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
 
[	0.185272] ACPI: Dynamic OEM Table Load:
 
[	0.185283] ACPI: SSDT 0xFFFF9E46F9F75800 0005DC (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
 
[	0.185555] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
 
[	0.186807] ACPI: Dynamic OEM Table Load:
 
[	0.186811] ACPI: SSDT 0xFFFF9E46F9B94800 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
 
[	0.187079] ACPI: Dynamic OEM Table Load:
 
[	0.187082] ACPI: SSDT 0xFFFF9E46F9F693C0 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
 
[	0.187266] ACPI: Dynamic OEM Table Load:
 
[	0.187269] ACPI: SSDT 0xFFFF9E46F94D3800 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
 
[	0.188091] ACPI: Dynamic OEM Table Load:
 
[	0.188095] ACPI: SSDT 0xFFFF9E46F9F74800 0005AA (v02 PmRef  ApIst	00003000 INTL 20120913)
 
[	0.188531] ACPI: Dynamic OEM Table Load:
 
[	0.188534] ACPI: SSDT 0xFFFF9E46F94D0200 000119 (v02 PmRef  ApHwp	00003000 INTL 20120913)
 
[	0.188804] ACPI: Dynamic OEM Table Load:
 
[	0.188807] ACPI: SSDT 0xFFFF9E46F94D2A00 000119 (v02 PmRef  ApCst	00003000 INTL 20120913)
 
[	0.193617] ACPI : EC: EC stopped
 
[	0.193617] ACPI : EC: EC started
 
[	0.193747] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
 
[	0.193748] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
 
[	0.193749] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
 
[	0.193750] ACPI: Interpreter enabled
 
[	0.193788] ACPI: (supports S0 S3 S4 S5)
 
[	0.193789] ACPI: Using IOAPIC for interrupt routing
 
[	0.193822] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
 
[	0.196216] ACPI: Power Resource [PG00] (on)
 
[	0.224231] ACPI: Power Resource [PG01] (on)
 
[	0.224578] ACPI: Power Resource [PG02] (on)
 
[	0.225181] ACPI: Power Resource [WRST] (off)
 
[	0.225483] ACPI: Power Resource [WRST] (off)
 
[	0.225788] ACPI: Power Resource [WRST] (off)
 
[	0.226086] ACPI: Power Resource [WRST] (off)
 
[	0.226385] ACPI: Power Resource [WRST] (off)
 
[	0.226681] ACPI: Power Resource [WRST] (off)
 
[	0.226982] ACPI: Power Resource [WRST] (off)
 
[	0.227474] ACPI: Power Resource [WRST] (off)
 
[	0.227797] ACPI: Power Resource [WRST] (off)
 
[	0.228117] ACPI: Power Resource [WRST] (off)
 
[	0.228414] ACPI: Power Resource [WRST] (off)
 
[	0.228709] ACPI: Power Resource [WRST] (off)
 
[	0.229012] ACPI: Power Resource [WRST] (off)
 
[	0.229320] ACPI: Power Resource [WRST] (off)
 
[	0.229620] ACPI: Power Resource [WRST] (off)
 
[	0.229915] ACPI: Power Resource [WRST] (off)
 
[	0.230213] ACPI: Power Resource [WRST] (off)
 
[	0.230510] ACPI: Power Resource [WRST] (off)
 
[	0.230810] ACPI: Power Resource [WRST] (off)
 
[	0.231108] ACPI: Power Resource [WRST] (off)
 
[	0.237975] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
 
[	0.237979] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
 
[	0.239225] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
 
[	0.239226] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
 
[	0.239663] PCI host bridge to bus 0000:00
 
[	0.239664] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
 
[	0.239665] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
 
[	0.239666] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
 
[	0.239667] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
 
[	0.239667] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
 
[	0.239668] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
 
[	0.239669] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
 
[	0.239669] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
 
[	0.239670] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
 
[	0.239671] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
 
[	0.239671] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
 
[	0.239672] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
 
[	0.239673] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
 
[	0.239673] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
 
[	0.239674] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
 
[	0.239675] pci_bus 0000:00: root bus resource [mem 0x7b000000-0xdfffffff window]
 
[	0.239675] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
 
[	0.239676] pci_bus 0000:00: root bus resource [bus 00-fe]
 
[	0.239682] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
 
[	0.239769] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
 
[	0.239799] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
 
[	0.239893] pci 0000:00:01.0: System wakeup disabled by ACPI
 
[	0.239940] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
 
[	0.239947] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
 
[	0.239951] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
 
[	0.239954] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
 
[	0.240051] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
 
[	0.240059] pci 0000:00:04.0: reg 0x10: [mem 0xdf320000-0xdf327fff 64bit]
 
[	0.240223] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
 
[	0.240238] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
 
[	0.240295] pci 0000:00:14.0: PME# supported from D3hot D3cold
 
[	0.240385] pci 0000:00:14.0: System wakeup disabled by ACPI
 
[	0.240411] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
 
[	0.240426] pci 0000:00:14.2: reg 0x10: [mem 0xdf338000-0xdf338fff 64bit]
 
[	0.240590] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
 
[	0.240649] pci 0000:00:15.0: reg 0x10: [mem 0xdf337000-0xdf337fff 64bit]
 
[	0.240885] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
 
[	0.240931] pci 0000:00:15.1: reg 0x10: [mem 0xdf336000-0xdf336fff 64bit]
 
[	0.241156] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
 
[	0.241175] pci 0000:00:16.0: reg 0x10: [mem 0xdf335000-0xdf335fff 64bit]
 
[	0.241239] pci 0000:00:16.0: PME# supported from D3hot
 
[	0.241352] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
 
[	0.241363] pci 0000:00:17.0: reg 0x10: [mem 0xdf330000-0xdf331fff]
 
[	0.241369] pci 0000:00:17.0: reg 0x14: [mem 0xdf334000-0xdf3340ff]
 
[	0.241375] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
 
[	0.241380] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
 
[	0.241386] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
 
[	0.241392] pci 0000:00:17.0: reg 0x24: [mem 0xdf333000-0xdf3337ff]
 
[	0.241425] pci 0000:00:17.0: PME# supported from D3hot
 
[	0.241529] pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
 
[	0.241580] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
 
[	0.241669] pci 0000:00:1c.0: System wakeup disabled by ACPI
 
[	0.241700] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
 
[	0.241750] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
 
[	0.241839] pci 0000:00:1c.3: System wakeup disabled by ACPI
 
[	0.241886] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
 
[	0.242067] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
 
[	0.242077] pci 0000:00:1f.2: reg 0x10: [mem 0xdf32c000-0xdf32ffff]
 
[	0.242212] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
 
[	0.242232] pci 0000:00:1f.3: reg 0x10: [mem 0xdf328000-0xdf32bfff 64bit]
 
[	0.242260] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
 
[	0.242304] pci 0000:00:1f.3: PME# supported from D3hot D3cold
 
[	0.242428] pci 0000:00:1f.3: System wakeup disabled by ACPI
 
[	0.242460] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
 
[	0.242507] pci 0000:00:1f.4: reg 0x10: [mem 0xdf332000-0xdf3320ff 64bit]
 
[	0.242578] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
 
[	0.242778] pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
 
[	0.242795] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
 
[	0.242813] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
 
[	0.242828] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
 
[	0.242838] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
 
[	0.242849] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
 
[	0.242956] pci 0000:01:00.0: System wakeup disabled by ACPI
 
[	0.254840] pci 0000:00:01.0: PCI bridge to [bus 01]
 
[	0.254845] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
 
[	0.254851] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
 
[	0.254858] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
 
[	0.255182] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
 
[	0.255216] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
 
[	0.255438] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
 
[	0.255586] pci 0000:02:00.0: System wakeup disabled by ACPI
 
[	0.267143] pci 0000:00:1c.0: PCI bridge to [bus 02]
 
[	0.267147] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
 
[	0.267210] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
 
[	0.267226] pci 0000:03:00.0: reg 0x10: [mem 0xdf115000-0xdf115fff]
 
[	0.267281] pci 0000:03:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
 
[	0.267358] pci 0000:03:00.0: supports D1 D2
 
[	0.267359] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
 
[	0.267444] pci 0000:03:00.0: System wakeup disabled by ACPI
 
[	0.267479] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
 
[	0.267496] pci 0000:03:00.1: reg 0x10: [io  0xd000-0xd0ff]
 
[	0.267520] pci 0000:03:00.1: reg 0x18: [mem 0xdf114000-0xdf114fff 64bit]
 
[	0.267535] pci 0000:03:00.1: reg 0x20: [mem 0xdf110000-0xdf113fff 64bit]
 
[	0.267616] pci 0000:03:00.1: supports D1 D2
 
[	0.267617] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
 
[	0.278867] pci 0000:00:1c.3: PCI bridge to [bus 03]
 
[	0.278872] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
 
[	0.278877] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
 
[	0.280897] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.280938] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
 
[	0.280978] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.281017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.281056] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.281094] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.281133] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.281172] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
 
[	0.281595] ACPI: Enabled 6 GPEs in block 00 to 7F
 
[	0.281731] ACPI : EC: event unblocked
 
[	0.281743] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
 
[	0.281744] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
 
[	0.282026] SCSI subsystem initialized
 
[	0.282052] libata version 3.00 loaded.
 
[	0.282076] pci 0000:00:02.0: vgaarb: setting as boot VGA device
 
[	0.282077] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
 
[	0.282080] pci 0000:00:02.0: vgaarb: bridge control possible
 
[	0.282080] vgaarb: loaded
 
[	0.282093] ACPI: bus type USB registered
 
[	0.282104] usbcore: registered new interface driver usbfs
 
[	0.282110] usbcore: registered new interface driver hub
 
[	0.282123] usbcore: registered new device driver usb
 
[	0.282178] Registered efivars operations
 
[	0.285367] PCI: Using ACPI for IRQ routing
 
[	0.314098] PCI: pci_cache_line_size set to 64 bytes
 
[	0.314465] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
 
[	0.314465] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
 
[	0.314466] e820: reserve RAM buffer [mem 0x72490000-0x73ffffff]
 
[	0.314467] e820: reserve RAM buffer [mem 0x7252d000-0x73ffffff]
 
[	0.314467] e820: reserve RAM buffer [mem 0x758da000-0x77ffffff]
 
[	0.314468] e820: reserve RAM buffer [mem 0x76983000-0x77ffffff]
 
[	0.314469] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
 
[	0.314529] NetLabel: Initializing
 
[	0.314530] NetLabel:  domain hash size = 128
 
[	0.314530] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
 
[	0.314539] NetLabel:  unlabeled traffic allowed by default
 
[	0.314676] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
 
[	0.314679] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
 
[	0.316723] clocksource: Switched to clocksource hpet
 
[	0.321948] VFS: Disk quotas dquot_6.6.0
 
[	0.321958] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 
[	0.322019] AppArmor: AppArmor Filesystem Enabled
 
[	0.322057] pnp: PnP ACPI init
 
[	0.322270] system 00:00: [io  0x0680-0x069f] has been reserved
 
[	0.322271] system 00:00: [io  0xffff] has been reserved
 
[	0.322272] system 00:00: [io  0xffff] has been reserved
 
[	0.322273] system 00:00: [io  0xffff] has been reserved
 
[	0.322273] system 00:00: [io  0x1800-0x18fe] has been reserved
 
[	0.322274] system 00:00: [io  0x164e-0x164f] has been reserved
 
[	0.322276] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.322347] system 00:01: [io  0x0800-0x087f] has been reserved
 
[	0.322348] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.322364] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
 
[	0.322390] system 00:03: [io  0x1854-0x1857] has been reserved
 
[	0.322391] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
 
[	0.322482] system 00:04: [io  0x0240-0x0259] has been reserved
 
[	0.322484] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.322513] pnp 00:05: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
 
[	0.322636] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
 
[	0.322637] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
 
[	0.322639] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
 
[	0.322640] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
 
[	0.322641] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
 
[	0.322642] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
 
[	0.322643] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
 
[	0.322644] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
 
[	0.322644] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
 
[	0.322645] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
 
[	0.322647] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.322675] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
 
[	0.322676] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
 
[	0.322677] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
 
[	0.322678] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
 
[	0.322678] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
 
[	0.322679] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
 
[	0.322680] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
 
[	0.322681] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.322922] system 00:08: [io  0xff00-0xfffe] has been reserved
 
[	0.322923] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.323790] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
 
[	0.323791] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
 
[	0.323792] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
 
[	0.323793] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
 
[	0.324445] pnp: PnP ACPI: found 10 devices
 
[	0.331223] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
 
[	0.331239] pci 0000:00:01.0: PCI bridge to [bus 01]
 
[	0.331241] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
 
[	0.331242] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
 
[	0.331244] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
 
[	0.331247] pci 0000:00:1c.0: PCI bridge to [bus 02]
 
[	0.331250] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
 
[	0.331254] pci 0000:00:1c.3: PCI bridge to [bus 03]
 
[	0.331255] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
 
[	0.331258] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
 
[	0.331263] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
 
[	0.331263] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
 
[	0.331264] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
 
[	0.331265] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
 
[	0.331265] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
 
[	0.331266] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
 
[	0.331267] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
 
[	0.331267] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
 
[	0.331268] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
 
[	0.331269] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
 
[	0.331269] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
 
[	0.331270] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
 
[	0.331271] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
 
[	0.331271] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
 
[	0.331272] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
 
[	0.331272] pci_bus 0000:00: resource 19 [mem 0x7b000000-0xdfffffff window]
 
[	0.331273] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
 
[	0.331274] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
 
[	0.331274] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
 
[	0.331275] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
 
[	0.331276] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
 
[	0.331277] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
 
[	0.331277] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
 
[	0.331382] NET: Registered protocol family 2
 
[	0.331491] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
 
[	0.331602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
 
[	0.331730] TCP: Hash tables configured (established 65536 bind 65536)
 
[	0.331747] UDP hash table entries: 4096 (order: 5, 131072 bytes)
 
[	0.331767] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
 
[	0.331806] NET: Registered protocol family 1
 
[	0.331815] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
 
[	0.332178] PCI: CLS 0 bytes, default 64
 
[	0.332205] Unpacking initramfs...
 
[	0.870247] Freeing initrd memory: 48368K
 
[	0.870271] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.0
 
[	0.870273] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.1
 
[	0.870282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
 
[	0.870284] software IO TLB [mem 0x6d443000-0x71443000] (64MB) mapped at [ffff9e44ed443000-ffff9e44f1442fff]
 
[	0.870512] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
 
[	0.870709] Scanning for low memory corruption every 60 seconds
 
[	0.871027] audit: initializing netlink subsys (disabled)
 
[	0.871100] audit: type=2000 audit(1493019620.860:1): initialized
 
[	0.871414] Initialise system trusted keyrings
 
[	0.871541] workingset: timestamp_bits=36 max_order=21 bucket_order=0
 
[	0.872524] zbud: loaded
 
[	0.872921] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 
[	0.873094] fuse init (API version 7.26)
 
[	0.874986] Key type asymmetric registered
 
[	0.874987] Asymmetric key parser 'x509' registered
 
[	0.875016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
 
[	0.875057] io scheduler noop registered
 
[	0.875057] io scheduler deadline registered
 
[	0.875062] io scheduler cfq registered (default)
 
[	0.875678] pcieport 0000:00:1c.0: AER enabled with IRQ 123
 
[	0.875691] pcieport 0000:00:1c.3: AER enabled with IRQ 124
 
[	0.875700] pcieport 0000:00:01.0: Signaling PME with IRQ 122
 
[	0.875707] pcieport 0000:00:1c.0: Signaling PME with IRQ 123
 
[	0.875713] pcieport 0000:00:1c.3: Signaling PME with IRQ 124
 
[	0.875742] efifb: probing for efifb
 
[	0.875749] efifb: framebuffer at 0xb0000000, using 1920k, total 1920k
 
[	0.875750] efifb: mode is 800x600x32, linelength=3200, pages=1
 
[	0.875750] efifb: scrolling: redraw
 
[	0.875751] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
 
[	0.875825] Console: switching to colour frame buffer device 100x37
 
[	0.875832] fb0: EFI VGA frame buffer device
 
[	0.875835] intel_idle: MWAIT substates: 0x11142120
 
[	0.875836] intel_idle: v0.4.1 model 0x5E
 
[	0.876185] intel_idle: lapic_timer_reliable_states 0xffffffff
 
[	0.876265] ACPI: AC Adapter [AC0] (on-line)
 
[	0.877460] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
 
[	0.878852] ACPI: Lid Switch [LID]
 
[	0.878875] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
 
[	0.878877] ACPI: Sleep Button [SLPB]
 
[	0.878897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
 
[	0.878898] ACPI: Power Button [PWRF]
 
[	0.880156] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
 
[	0.880233] thermal LNXTHERM:00: registered as thermal_zone0
 
[	0.880234] ACPI: Thermal Zone [THRM] (59 C)
 
[	0.880255] GHES: HEST is not enabled!
 
[	0.880366] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
 
[	0.882487] Linux agpgart interface v0.103
 
[	0.890747] ACPI: Battery Slot [BAT0] (battery present)
 
[	0.893179] loop: module loaded
 
[	0.893270] libphy: Fixed MDIO Bus: probed
 
[	0.893270] tun: Universal TUN/TAP device driver, 1.6
 
[	0.893270] tun: (C) 1999-2004 Max Krasnyansky 
 
[	0.893342] PPP generic driver version 2.4.2
 
[	0.893425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 
[	0.893443] ehci-pci: EHCI PCI platform driver
 
[	0.893449] ehci-platform: EHCI generic platform driver
 
[	0.893454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 
[	0.893455] ohci-pci: OHCI PCI platform driver
 
[	0.893459] ohci-platform: OHCI generic platform driver
 
[	0.893462] uhci_hcd: USB Universal Host Controller Interface driver
 
[	0.893553] xhci_hcd 0000:00:14.0: xHCI Host Controller
 
[	0.893556] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
 
[	0.894623] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
 
[	0.894626] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
 
[	0.894681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
 
[	0.894681] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 
[	0.894682] usb usb1: Product: xHCI Host Controller
 
[	0.894682] usb usb1: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
 
[	0.894683] usb usb1: SerialNumber: 0000:00:14.0
 
[	0.894801] hub 1-0:1.0: USB hub found
 
[	0.894814] hub 1-0:1.0: 16 ports detected
 
[	0.895588] xhci_hcd 0000:00:14.0: xHCI Host Controller
 
[	0.895590] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
 
[	0.895606] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
 
[	0.895607] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 
[	0.895608] usb usb2: Product: xHCI Host Controller
 
[	0.895608] usb usb2: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
 
[	0.895609] usb usb2: SerialNumber: 0000:00:14.0
 
[	0.895720] hub 2-0:1.0: USB hub found
 
[	0.895728] hub 2-0:1.0: 8 ports detected
 
[	0.895866] usb: port power management may be unreliable
 
[	0.896177] i8042: PNP: PS/2 Controller [PNP030b:pS2K] at 0x60,0x64 irq 1
 
[	0.896178] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
 
[	0.897430] serio: i8042 KBD port at 0x60,0x64 irq 1
 
[	0.897588] mousedev: PS/2 mouse device common for all mice
 
[	0.897969] rtc_cmos 00:02: RTC can wake from S4
 
[	0.898370] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
 
[	0.898464] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
 
[	0.898467] i2c /dev entries driver
 
[	0.898496] device-mapper: uevent: version 1.0.3
 
[	0.898619] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
 
[	0.898620] intel_pstate: Intel P-state driver initializing
 
[	0.899654] intel_pstate: HWP enabled
 
[	0.900019] ledtrig-cpu: registered to indicate activity on CPUs
 
[	0.900021] EFI Variables Facility v0.08 2004-May-17
 
[	0.904049] NET: Registered protocol family 10
 
[	0.908091] Segment Routing with IPv6
 
[	0.908117] NET: Registered protocol family 17
 
[	0.908122] Key type dns_resolver registered
 
[	0.908741] microcode: sig=0x506e3, pf=0x20, revision=0x9e
 
[	0.908941] microcode: Microcode Update Driver: v2.2.
 
[	0.909060] registered taskstats version 1
 
[	0.909069] Loading compiled-in X.509 certificates
 
[	0.910831] Loaded X.509 cert 'Build time autogenerated kernel key: 8e99ee5b0fead84880b7849b477f2b92957907bc'
 
[	0.910842] zswap: loaded using pool lzo/zbud
 
[	0.919859] Key type big_key registered
 
[	0.919861] Key type trusted registered
 
[	0.921662] Key type encrypted registered
 
[	0.921664] AppArmor: AppArmor sha1 policy hashing enabled
 
[	0.921666] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
 
[	0.921676] evm: HMAC attrs: 0x1
 
[	0.922492]   Magic number: 13:663:673
 
[	0.922717] rtc_cmos 00:02: setting system clock to 2017-04-24 07:40:21 UTC (1493019621)
 
[	0.922887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
 
[	0.922887] EDD information not available.
 
[	0.922958] PM: Hibernation image not present or could not be loaded.
 
[	0.924172] Freeing unused kernel memory: 2228K
 
[	0.924173] Write protecting the kernel read-only data: 14336k
 
[	0.924650] Freeing unused kernel memory: 1164K
 
[	0.925056] Freeing unused kernel memory: 280K
 
[	0.929574] x86/mm: Checked W+X mappings: passed, no W+X pages found.
 
[	0.937788] random: systemd-udevd: uninitialized urandom read (16 bytes read)
 
[	0.937842] random: systemd-udevd: uninitialized urandom read (16 bytes read)
 
[	0.937849] random: systemd-udevd: uninitialized urandom read (16 bytes read)
 
[	0.938251] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.938275] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.939169] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.939178] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.939431] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.939457] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.939481] random: udevadm: uninitialized urandom read (16 bytes read)
 
[	0.940018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
 
[	0.955658] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
 
[	0.973644] hidraw: raw HID events driver (C) Jiri Kosina
 
[	0.978676] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 126
 
[	0.979098] ahci 0000:00:17.0: version 3.0
 
[	0.979106] [drm] Initialized
 
[	0.979228] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 
[	0.979231] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
 
[	0.979369] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
 
[	0.979371] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
 
[	0.989812] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffa99fc0cf9000, 2c:56:dc:0b:25:a1, XID 1c800800 IRQ 128
 
[	0.989813] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 
[	0.990611] nvidia: loading out-of-tree module taints kernel.
 
[	0.990615] nvidia: module license 'NVIDIA' taints kernel.
 
[	0.990616] Disabling lock debugging due to kernel taint
 
[	0.994806] nvidia: module verification failed: signature and/or required key missing - tainting kernel
 
[	0.998942] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
 
[	0.998953] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.39  Tue Jan 31 20:47:00 PST 2017
 
[	0.998953]  (using threaded interrupts)
 
 
[	1.000256] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.39  Tue Jan 31 19:41:48 PST 2017
 
[	1.000821] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
 
[	1.002175] r8169 0000:03:00.1 enp3s0f1: renamed from eth0
 
[	1.021539] scsi host0: ahci
 
[	1.021939] scsi host1: ahci
 
[	1.022359] scsi host2: ahci
 
[	1.022575] scsi host3: ahci
 
[	1.022610] ata1: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333100 irq 127
 
[	1.022611] ata2: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333180 irq 127
 
[	1.022612] ata3: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333200 irq 127
 
[	1.022616] ata4: SATA max UDMA/133 abar m2048@0xdf333000 port 0xdf333280 irq 127
 
[	1.023221] [drm] Memory usable by graphics device = 4096M
 
[	1.023222] checking generic (b0000000 1e0000) vs hw (b0000000 10000000)
 
[	1.023223] fb: switching to inteldrmfb from EFI VGA
 
[	1.023238] Console: switching to colour dummy device 80x25
 
[	1.023401] [drm] Replacing VGA console driver
 
[	1.029075] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 
[	1.029076] [drm] Driver supports precise vblank timestamp query.
 
[	1.038060] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
 
[	1.044160] [drm] GuC firmware load skipped
 
[	1.065724] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
 
[	1.067700] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
 
[	1.067889] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
 
[	1.067953] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input5
 
[	1.068008] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
 
[	1.088318] fbcon: inteldrmfb (fb0) is primary device
 
[	1.088398] Console: switching to colour frame buffer device 240x67
 
[	1.088416] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
 
[	1.221058] usb 1-4: new high-speed USB device number 2 using xhci_hcd
 
[	1.336563] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
 
[	1.336585] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
 
[	1.336617] ata3: SATA link down (SStatus 4 SControl 300)
 
[	1.336649] ata1: SATA link down (SStatus 4 SControl 300)
 
[	1.338005] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
 
[	1.338006] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
 
[	1.339956] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
 
[	1.347234] ata2.00: configured for UDMA/100
 
[	1.353938] scsi 1:0:0:0: CD-ROM			MATSHITA DVD-RAM UJ8HC	1.00 PQ: 0 ANSI: 5
 
[	1.381682] ata4.00: configured for UDMA/133
 
[	1.391621] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
 
[	1.391623] cdrom: Uniform CD-ROM driver Revision: 3.20
 
[	1.391892] sr 1:0:0:0: Attached scsi CD-ROM sr0
 
[	1.392017] sr 1:0:0:0: Attached scsi generic sg0 type 5
 
[	1.392614] scsi 3:0:0:0: Direct-Access	 ATA	  HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
 
[	1.421682] usb 1-4: New USB device found, idVendor=04f2, idProduct=b450
 
[	1.421683] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
 
[	1.421684] usb 1-4: Product: USB2.0 HD UVC WebCam
 
[	1.421684] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
 
[	1.421685] usb 1-4: SerialNumber: 0x0001
 
[	1.433296] sd 3:0:0:0: Attached scsi generic sg1 type 0
 
[	1.433665] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
 
[	1.433667] sd 3:0:0:0: [sda] 4096-byte physical blocks
 
[	1.433731] sd 3:0:0:0: [sda] Write Protect is off
 
[	1.433732] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
 
[	1.433897] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[	1.498417]  sda: sda1 sda2
 
[	1.499416] sd 3:0:0:0: [sda] Attached SCSI disk
 
[	1.545023] usb 1-9: new full-speed USB device number 3 using xhci_hcd
 
[	1.687100] usb 1-9: New USB device found, idVendor=8087, idProduct=0a2a
 
[	1.687101] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
 
[	1.854816] random: fast init done
 
[	1.893005] clocksource: Switched to clocksource tsc
 
[	2.728539] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
 
[	2.793277] [drm] RC6 on
 
[	3.811052] ip_tables: (C) 2000-2006 Netfilter Core Team
 
[	3.923267] random: crng init done
 
[	3.924767] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
 
[	3.924898] systemd[1]: Detected architecture x86-64.
 
[	3.937628] systemd[1]: Set hostname to .
 
[	4.962564] systemd[1]: Listening on udev Kernel Socket.
 
[	4.962599] systemd[1]: Reached target Remote File Systems.
 
[	4.962622] systemd[1]: Listening on Journal Socket.
 
[	4.962701] systemd[1]: Created slice System Slice.
 
[	4.962992] systemd[1]: Mounting Debug File System...
 
[	4.963280] systemd[1]: Started Read required files in advance.
 
[	4.963605] systemd[1]: Starting Uncomplicated firewall...
 
[	5.495780] lp: driver loaded but no devices found
 
[	5.512175] ppdev: user-space parallel port driver
 
[   13.389123] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
 
[   13.470222] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6
 
[   13.483473] Bluetooth: Core ver 2.22
 
[   13.483483] NET: Registered protocol family 31
 
[   13.483484] Bluetooth: HCI device and connection manager initialized
 
[   13.483486] Bluetooth: HCI socket layer initialized
 
[   13.483487] Bluetooth: L2CAP socket layer initialized
 
[   13.483491] Bluetooth: SCO socket layer initialized
 
[   13.496788] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
 
[   13.497108] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
 
[   13.507646] usbcore: registered new interface driver btusb
 
[   13.523037] Bluetooth: hci0: read Intel version: 370810011003110e00
 
[   13.530663] wmi: Mapper loaded
 
[   13.544189] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
 
[   13.544190] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
 
[   13.544190] RAPL PMU: hw unit of domain package 2^-14 Joules
 
[   13.544190] RAPL PMU: hw unit of domain dram 2^-14 Joules
 
[   13.544191] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
 
[   13.544191] RAPL PMU: hw unit of domain psys 2^-14 Joules
 
[   13.549769] AVX2 version of gcm_enc/dec engaged.
 
[   13.549770] AES CTR mode by8 optimization enabled
 
[   13.568676] intel_rapl: Found RAPL domain package
 
[   13.568677] intel_rapl: Found RAPL domain core
 
[   13.568678] intel_rapl: Found RAPL domain uncore
 
[   13.568678] intel_rapl: Found RAPL domain dram
 
[   13.577125] systemd-journald[291]: Received request to flush runtime journal from PID 1
 
[   13.616188] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
 
[   13.616194] tpm_crb: probe of MSFT0101:00 failed with error -16
 
[   13.640793] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
 
[   13.643122] idma64 idma64.0: Found Intel integrated DMA 64-bit
 
[   13.660735] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
 
[   13.660956] idma64 idma64.1: Found Intel integrated DMA 64-bit
 
[   13.691815] Intel(R) Wireless WiFi driver for Linux
 
[   13.691816] Copyright(c) 2003- 2015 Intel Corporation
 
[   13.709386] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
 
[   13.729241] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
 
[   13.729361] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
 
[   13.729369] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
 
[   13.729375] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
 
[   13.749811] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
 
[   13.761972] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
 
[   13.764287] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   13.764734] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   13.798565] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
 
[   13.833098] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
 
[   13.848960] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
 
[   13.908801] i2c-ELAN1000:00 supply vcc not found, using dummy regulator
 
[   13.929766] Adding 2097148k swap on /swapfile.  Priority:-1 extents:6 across:2260988k FS
 
[   14.010211] media: Linux media interface: v0.10
 
[   14.013146] Linux video capture interface: v2.00
 
[   14.017037] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
 
[   14.052339] asus_wmi: ASUS WMI generic driver loaded
 
[   14.053259] asus_wmi: Initialization: 0x1
 
[   14.053278] asus_wmi: BIOS WMI version: 7.9
 
[   14.053298] asus_wmi: SFUN value: 0xa0077
 
[   14.053900] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
 
[   14.055329] asus_wmi: Number of fans: 1
 
[   14.118720] Bluetooth: HCI UART driver ver 2.3
 
[   14.118721] Bluetooth: HCI UART protocol H4 registered
 
[   14.118721] Bluetooth: HCI UART protocol BCSP registered
 
[   14.118722] Bluetooth: HCI UART protocol LL registered
 
[   14.118722] Bluetooth: HCI UART protocol ATH3K registered
 
[   14.118722] Bluetooth: HCI UART protocol Three-wire (H5) registered
 
[   14.118744] Bluetooth: HCI UART protocol Intel registered
 
[   14.118752] Bluetooth: HCI UART protocol Broadcom registered
 
[   14.118752] Bluetooth: HCI UART protocol QCA registered
 
[   14.118753] Bluetooth: HCI UART protocol AG6XX registered
 
[   14.118753] Bluetooth: HCI UART protocol Marvell registered
 
[   14.173437] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b450)
 
[   14.177558] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
 
[   14.177559] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
 
[   14.177560] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
 
[   14.177623] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input8
 
[   14.177670] usbcore: registered new interface driver uvcvideo
 
[   14.177670] USB Video Class driver (1.1.1)
 
[   14.235132] elan_i2c i2c-ELAN1000:00: Elan Touchpad: Module ID: 0x0005, Firmware: 0x0004, Sample: 0x000d, IAP: 0x000e
 
[   14.235345] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1000:00/input/input9
 
[   14.361569] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
 
[   14.413186] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
 
[   14.413486] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
 
[   14.413487] snd_hda_codec_conexant hdaudioC0D0:	speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
 
[   14.413488] snd_hda_codec_conexant hdaudioC0D0:	hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
 
[   14.413489] snd_hda_codec_conexant hdaudioC0D0:	mono: mono_out=0x0
 
[   14.413489] snd_hda_codec_conexant hdaudioC0D0:	inputs:
 
[   14.413490] snd_hda_codec_conexant hdaudioC0D0:	  Internal Mic=0x1a
 
[   14.413491] snd_hda_codec_conexant hdaudioC0D0:	  Mic=0x18
 
[   14.414399] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
 
[   14.420563] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
 
[   14.420615] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
 
[   14.420662] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
 
[   14.420709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
 
[   14.420759] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
 
[   14.743761] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242
 
[   15.100915] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.100958] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.100981] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.101003] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.101024] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.101085] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.101107] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.129282] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   15.361773] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   16.983226] audit: type=1400 audit(1493019637.554:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=799 comm="apparmor_parser"
 
[   16.983228] audit: type=1400 audit(1493019637.554:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=795 comm="apparmor_parser"
 
[   16.983842] audit: type=1400 audit(1493019637.554:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=804 comm="apparmor_parser"
 
[   16.984050] audit: type=1400 audit(1493019637.554:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=802 comm="apparmor_parser"
 
[   16.984999] audit: type=1400 audit(1493019637.558:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=807 comm="apparmor_parser"
 
[   16.985001] audit: type=1400 audit(1493019637.558:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=807 comm="apparmor_parser"
 
[   16.985185] audit: type=1400 audit(1493019637.558:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=798 comm="apparmor_parser"
 
[   16.985199] audit: type=1400 audit(1493019637.558:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
 
[   16.985201] audit: type=1400 audit(1493019637.558:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=798 comm="apparmor_parser"
 
[   16.985202] audit: type=1400 audit(1493019637.558:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
 
[   17.386002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 
[   17.386003] Bluetooth: BNEP filters: protocol multicast
 
[   17.386006] Bluetooth: BNEP socket layer initialized
 
[   17.765968] bbswitch: version 0.8
 
[   17.765976] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
 
[   17.765984] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
 
[   17.766000] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   17.766099] bbswitch: detected an Optimus _DSM function
 
[   17.766419] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
 
[   17.785432] systemd[1]: snapd.refresh.timer: Adding 5h 34min 58.581060s random time.
 
[   17.785436] systemd[1]: snapd.refresh.timer: Adding 3h 6min 50.773436s random time.
 
[   17.833422] systemd[1]: snapd.refresh.timer: Adding 2h 7min 50.081766s random time.
 
[   17.833426] systemd[1]: snapd.refresh.timer: Adding 3h 5min 39.397977s random time.
 
[   18.933865] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
 
[   18.987324] r8169 0000:03:00.1 enp3s0f1: link down
 
[   18.987412] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
 
[   18.989684] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
 
[   18.993446] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   18.993981] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.062267] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.062818] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.082902] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
 
[   19.091905] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.092358] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.158932] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.159483] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
 
[   19.181526] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
 
[   19.240714] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.240910] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.241022] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.241117] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.241201] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.241328] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.241413] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.251186] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
 
[   19.447010] nvidia-modeset: Allocated GPU:0 (GPU-779e2d55-6c28-4969-f9cb-1f5e44aba7ab) @ PCI:0000:01:00.0
 
[   19.447201] nvidia-modeset: Freed GPU:0 (GPU-779e2d55-6c28-4969-f9cb-1f5e44aba7ab) @ PCI:0000:01:00.0
 
[   19.469247] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
 
[   23.168451] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
 
[   23.231705] wlp2s0: authenticate with b8:26:6c:5a:ec:dd
 
[   23.236924] wlp2s0: send auth to b8:26:6c:5a:ec:dd (try 1/3)
 
[   23.240072] wlp2s0: authenticated
 
[   23.240794] wlp2s0: associate with b8:26:6c:5a:ec:dd (try 1/3)
 
[   23.242681] wlp2s0: RX AssocResp from b8:26:6c:5a:ec:dd (capab=0x411 status=0 aid=3)
 
[   23.244068] wlp2s0: associated
 
[   23.244131] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
 
[   23.261002] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by b8:26:6c:5a:ec:dd
 
[   23.414410] Bluetooth: RFCOMM TTY layer initialized
 
[   23.414421] Bluetooth: RFCOMM socket layer initialized
 
[   23.414429] Bluetooth: RFCOMM ver 1.11
 
[   35.498064] systemd[1]: snapd.refresh.timer: Adding 1h 15min 5.206920s random time.
 
[   35.498069] systemd[1]: snapd.refresh.timer: Adding 2h 6min 4.558950s random time.
 
[   42.320886] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
 
[   42.341882] usb 2-1: New USB device found, idVendor=0bc2, idProduct=61b5
 
[   42.341886] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 
[   42.341889] usb 2-1: Product: M3
 
[   42.341891] usb 2-1: Manufacturer: Seagate
 
[   42.341894] usb 2-1: SerialNumber: NM12PNFA
 
[   42.420554] usbcore: registered new interface driver usb-storage
 
[   42.434515] scsi host4: uas
 
[   42.434599] usbcore: registered new interface driver uas
 
[   42.434973] scsi 4:0:0:0: Direct-Access	 Seagate  M3			   0707 PQ: 0 ANSI: 6
 
[   42.497175] sd 4:0:0:0: Attached scsi generic sg2 type 0
 
[   45.572400] systemd[1]: snapd.refresh.timer: Adding 3h 37min 57.467599s random time.
 
[   45.572405] systemd[1]: snapd.refresh.timer: Adding 3h 47min 27.022269s random time.
 
[   46.493213] sd 4:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
 
[   46.493214] sd 4:0:0:0: [sdb] 4096-byte physical blocks
 
[   46.493351] sd 4:0:0:0: [sdb] Write Protect is off
 
[   46.493352] sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08
 
[   46.493616] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[   46.525486]  sdb: sdb1
 
[   46.526749] sd 4:0:0:0: [sdb] Attached SCSI disk
Euh oui je sais c'est énorme mais le "cat /var/log/syslog" me donne un fichier encore plus grand ! en le copiant intégralement dans un document DOC ca me sort 181 pages donc j'ai préféré mettre celui ci en espérant que cela vous suffise !! désolé pour la place prise !


et voici le journalctl beaucoup plus raisonnable !! :

root@manu-GL752VW:~# journalctl
-- Logs begin at Mon 2017-04-24 09:40:25 CEST, end at Mon 2017-04-24 10:07:01 CE
avril 24 09:40:25 manu-GL752VW kernel: microcode: microcode updated early to rev
avril 24 09:40:25 manu-GL752VW kernel: Linux version 4.10.0-19-generic (buildd@l
avril 24 09:40:25 manu-GL752VW kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-4.
avril 24 09:40:25 manu-GL752VW kernel: KERNEL supported cpus:
avril 24 09:40:25 manu-GL752VW kernel: Intel GenuineIntel
avril 24 09:40:25 manu-GL752VW kernel: AMD AuthenticAMD
avril 24 09:40:25 manu-GL752VW kernel: Centaur CentaurHauls
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: Supporting XSAVE feature 0x001:
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: Supporting XSAVE feature 0x002:
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: Supporting XSAVE feature 0x004:
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: Supporting XSAVE feature 0x008:
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: Supporting XSAVE feature 0x010:
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: xstate_offset[2]: 576, xstate_s
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: xstate_offset[3]: 832, xstate_s
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: xstate_offset[4]: 896, xstate_s
avril 24 09:40:25 manu-GL752VW kernel: x86/fpu: Enabled xstate features 0x1f, co
avril 24 09:40:25 manu-GL752VW kernel: e820: BIOS-provided physical RAM map:
avril 24 09:40:25 manu-GL752VW kernel: BIOS-e820: [mem 0x0000000000000000-0x0000
avril 24 09:40:25 manu-GL752VW kernel: BIOS-e820: [mem 0x0000000000058000-0x0000
avril 24 09:40:25 manu-GL752VW kernel: BIOS-e820: [mem 0x0000000000059000-0x0000
avril 24 09:40:25 manu-GL752VW kernel: BIOS-e820: [mem 0x000000000009e000-0x0000
avril 24 09:40:25 manu-GL752VW kernel: BIOS-e820: [mem 0x0000000000100000-0x0000
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Ok,

juste une question, quand tu redémarrais ton ordinateur sous Windows, en passant par l'option "redémarrer Windows" (et non dans le sens: "L'ordinateur est éteint, puis je l'allume"), le problème au redémarrage se produisait ?

Ensuite, quand tu dis:
Manbo49 a dit:
En effet, sous windows, lorsque le pc finissait par se lancer et se stabiliser
Cliquez pour agrandir...
Le démarrage était très long ?

COrdialement
 
M

Manbo49

Alors quand je disais que le pc finissait par se lancer c'est pas dnas le sens que le demarrage etait long mais dans le sens que parfois il fallait de nombreux demarrages pour qu'un demarrage finisse par ne pas planter et me permettre d'utiliser mon pc normalement.

En fait pdt plusieurs demarrages j'arrivais bien sur le bureau mais souvent pas de pointeur de souris ce qui signifiait que ce n'etait qu'une question de secondes ou minutes avant que le pc plante (bsod ou coupure nette...) et puis au bout de quelques essais infructueux il finissait par demarrer et là lorsque j'arrivais sur le bureau il y avait bien le pointeur et en general c'etait bon... d'ailleurs j'ai pu jouer plusieurs fois a des jeux récents en high resolution comme assassin's creed unity ou gta 5 sans faire planter la carte graphique...

Pour ce qui est du probleme au demarrage c'est dur a dire car souvent lorsque le pc demarrait mais s'appretait a planter (pas de souris comme dit au dessus) mais si je faisais redemarrer avant qu'il plante le redemarrage prenait un temps fou et finissait par deboucher sur le fameux bsod... il faudrait que je retestes mais du coup ca veut dire reinstall de windows lol ! Tu penses a qqch ?


Envoyé de mon iPad en utilisant l\'application Forum des portables
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Bonjour Manbo49,

Désolé pour l'attente, je suis vraiment occupé en ce moment.

Difficile de voir ce qui se passe, on va voir les données S.M.A.R.T de ton disque dur.



en root, dans un shell, tapes:

Code: 
 apt install smartmontools
puis tapes:

Code: 
 smatctl -t short /dev/sda
puis tapes:

Code: 
 smartctl -a /dev/sda
Puis poste le rapport obtenu de cette dernière commande.


Concernant ton problème, c'est vraiment bizarre, je pense à un problème matériel ou de corruption du microprogramme, je pense que tu as dû éteindre\redémarrer ton ordinateur, et le redémarrage s'est bien passé ? Si c'est le cas, cela aurait dû se produire sous Windows.

Peut-être que la raison est dû aussi, sous Windows10, à la mauvaise gestion des pilotes sous Windows 10, mais rien n'est sûr.

COrdialement
 
M

Manbo49

Salut Alexandre01 !!

Pas de soucis pour le temps de réponse je sais que je ne suis pas tout seul lol !

Ci dessous le résultat de la commande demandée...

Code: 
root@manu-GL752VW:~# smartctl -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-49-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Model Family:	 HGST Travelstar 7K1000
Device Model:	 HGST HTS721010A9E630
Serial Number:	JR100X6P3K23NE
LU WWN Device Id: 5 000cca 7dcf208c5
Firmware Version: JB0OA3J0
User Capacity:	1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:	 512 bytes logical, 4096 bytes physical
Rotation Rate:	7200 rpm
Form Factor:	  2.5 inches
Device is:		In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:	Sun Apr 30 18:57:35 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:	  ( 245) Self-test routine in progress...
50% of test remaining.
Total time to complete Offline 
data collection:  (   45) seconds.
Offline data collection
capabilities:   (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:			(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:		(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:   (   2) minutes.
Extended self-test routine
recommended polling time:   ( 185) minutes.
SCT capabilities:		 (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
 
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME		  FLAG	 VALUE WORST THRESH TYPE	  UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate	 0x000b   100   100   062	Pre-fail  Always	   -	   0
  2 Throughput_Performance  0x0005   100   100   040	Pre-fail  Offline	  -	   0
  3 Spin_Up_Time			0x0007   137   137   033	Pre-fail  Always	   -	   2
  4 Start_Stop_Count		0x0012   099   099   000	Old_age   Always	   -	   1952
  5 Reallocated_Sector_Ct   0x0033   100   100   005	Pre-fail  Always	   -	   0
  7 Seek_Error_Rate		 0x000b   100   100   067	Pre-fail  Always	   -	   0
  8 Seek_Time_Performance   0x0005   100   100   040	Pre-fail  Offline	  -	   0
  9 Power_On_Hours		  0x0012   098   098   000	Old_age   Always	   -	   1241
 10 Spin_Retry_Count		0x0013   100   100   060	Pre-fail  Always	   -	   0
 12 Power_Cycle_Count	   0x0032   100   100   000	Old_age   Always	   -	   1495
191 G-Sense_Error_Rate	  0x000a   100   100   000	Old_age   Always	   -	   0
192 Power-Off_Retract_Count 0x0032   099   099   000	Old_age   Always	   -	   356
193 Load_Cycle_Count		0x0012   100   100   000	Old_age   Always	   -	   7793
194 Temperature_Celsius	 0x0002   253   253   000	Old_age   Always	   -	   23 (Min/Max 10/49)
196 Reallocated_Event_Count 0x0032   100   100   000	Old_age   Always	   -	   0
197 Current_Pending_Sector  0x0022   100   100   000	Old_age   Always	   -	   0
198 Offline_Uncorrectable   0x0008   100   100   000	Old_age   Offline	  -	   0
199 UDMA_CRC_Error_Count	0x000a   200   200   000	Old_age   Always	   -	   0
223 Load_Retry_Count		0x000a   100   100   000	Old_age   Always	   -	   0
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1		0		0  Not_testing
	2		0		0  Not_testing
	3		0		0  Not_testing
	4		0		0  Not_testing
	5		0		0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Sinon je ne comprends pas bien ce que tu veux dire par :

alexandre01 a dit:
Concernant ton problème, c'est vraiment bizarre, je pense à un problème matériel ou de corruption du microprogramme, je pense que tu as dû éteindre\redémarrer ton ordinateur, et le redémarrage s'est bien passé ? Si c'est le cas, cela aurait dû se produire sous Windows.
Cliquez pour agrandir...
Corruption du microprogramme ? dans ce cas là y'a une piste de résolution possible ?
Sinon par rapport à l'extinction/redémarrage du pc ca ne pose plus de soucis depuis que je suis sous Ubuntu. Mais je comprends pas ce que tu veux dire par "cela aurait du se produire sous windows ?"

Merci d'avance !

Manbo49
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Salut Manbo49,

Manbo49 a dit:
Pas de soucis pour le temps de réponse je sais que je ne suis pas tout seul lol !

Ci dessous le résultat de la commande demandée...
Cliquez pour agrandir...
Je ne vos rien d'anormal concernant ton disque dur, tu peux toujours faire un test long, mais je ne pense pas que cela va changer quelque chose.


Manbo49 a dit:
Corruption du microprogramme ? dans ce cas là y'a une piste de résolution possible ?
Sinon par rapport à l'extinction/redémarrage du pc ca ne pose plus de soucis depuis que je suis sous Ubuntu. Mais je comprends pas ce que tu veux dire par "cela aurait du se produire sous windows ?"
Cliquez pour agrandir...
Je me suis mal exprimé, je voulais savoir si le problème du démarrage se produisait aussi sous Ubuntu (démarrage lent), or cela ne semble pas être le cas, je pense que tu as essayé le démarrage\utilisation en batterie seule, puis avec l'alimentation branchée seule,puis avec batterie\almentation en même temps.

Tu confirmes ?

Enfin, essaye de trouver de trouver une manette de PS3\4 (via les voisins, amis et autre) pour tester PCSX2, ce dernier mange énormément de processeur, peut-être que le problème provient du processeur.

J'aurai bien essayé un test de barette RAM, mas comme tu es sous ubuntu, tu aurais pu avoir des problèmes de freeze, hors cela n'a pas l'air d'être le cas.

COrdialement
 
M

Manbo49

alexandre01 a dit:
Je me suis mal exprimé, je voulais savoir si le problème du démarrage se produisait aussi sous Ubuntu (démarrage lent), or cela ne semble pas être le cas, je pense que tu as essayé le démarrage\utilisation en batterie seule, puis avec l'alimentation branchée seule,puis avec batterie\almentation en même temps.

Tu confirmes ?
Cliquez pour agrandir...
En fait c'est moi qui me suis mal exprimé lol ! Sous Windows mon PC ne démarrait pas LENTEMENT... il démarrait assez vite comme d'habitude, c'est juste qu'une fois passé l'écran de login et arrivé sur le bureau windows, 4 fois sur 5 le pointeur de souris n'était pas accessible, et cela se terminait à chaque fois sur une BSOD. Il arrivait qu'au bout de 5/6 voire 10 démarrages, le démarrage du pc débouche sur un bureau avec le pointeur de souris accessible ce qui voulait généralement dire que c'était bon, c'est à dire que je pouvais me servir de mon PC quasi normalement car généralement pas de plantage à suivre... c'est dans ces cas là qu'il m'est même arrivé de jouer à des jeux récents et en FULL pour charger un peu le GPU mais sans le faire sourciller...

Donc jamais eu de problème de "démarrage" au sens où celui ci serait interminable... je voulais juste dire que la plupart du temps le démarrage se déroulait tout à fait normalement mais finissait en général par se solder par un BSOD.

Je vais retester dès ce soir avec ma manette de ps3 et vous tiens au courant...

J'en peux plus de ce problème... j'aimerais pouvoir savoir d'où vient ce problème pour éventuellement le régler, le faire réparer ou le "jeter" mais au moins pouvoir avancer... c'est hyper frustrant !

En tout cas merci de votre aide précieuse !
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Manbo49 a dit:
J'en peux plus de ce problème... j'aimerais pouvoir savoir d'où vient ce problème pour éventuellement le régler, le faire réparer ou le "jeter" mais au moins pouvoir avancer... c'est hyper frustrant !
Cliquez pour agrandir...
Teste avec PCSCX2, pour voir si tout se passe bien, et si tu le souhaite, réessaye d'installer Windows, ou carrément faire un dualboot pour voir si quelque chose change.

Manbo49 a dit:
n fait c'est moi qui me suis mal exprimé lol ! Sous Windows mon PC ne démarrait pas LENTEMENT... il démarrait assez vite comme d'habitude, c'est juste qu'une fois passé l'écran de login et arrivé sur le bureau windows, 4 fois sur 5 le pointeur de souris n'était pas accessible, et cela se terminait à chaque fois sur une BSOD. Il arrivait qu'au bout de 5/6 voire 10 démarrages, le démarrage du pc débouche sur un bureau avec le pointeur de souris accessible ce qui voulait généralement dire que c'était bon, c'est à dire que je pouvais me servir de mon PC quasi normalement car généralement pas de plantage à suivre... c'est dans ces cas là qu'il m'est même arrivé de jouer à des jeux récents et en FULL pour charger un peu le GPU mais sans le faire sourciller...
Cliquez pour agrandir...
Tu travailes dans un secteur sensible ? cela ressemble à un malware.

Si tout se passe bien, on va réinstaller Windows pour voir si cela change quelque chose, et que les problèmes ne se reproduisent pas.

Ensuite, je te conseille de réinitialiser ton routeur, puis de changer le mot de passe\identifiant du routeu ravant de faire une réinstallation de Windows.

COrdialement
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Manbo49 a dit:
Pour ce qui est de la reinitialisation du routeur, tu veux dire juste un redemarrage de la box et un changement de mot de passe wifi ?
Cliquez pour agrandir...
Aussi le mot de passe de wifi si tu veux. IL faut absolument changer le nom d'utilisateur par défaut et le mot de passe par défaut pour aller à la configuration du routeur, car il y a en ce moment des botnets (réseau de pc infectés qui cherchent à infecter d'autres ordinateurs ou routeurs) qui ont soif d'aventure.

Manbo49 a dit:
Pas du tout !! Et mon PC est avant tout un PC perso...
Cliquez pour agrandir...
ok, il faut toutefois savoir que si tu connais quelqu'un qui travaille dans un secteur sensible, il est plus facile d'infecter des employés, afin d'infecter l'entreprise.


Et lui dire qu'un antivirus ne sert pas à grand chose, sauf à détecter des éléments déjà détectés. Si il est victime d'une attaque ciblée, il n' y a rien à faire, l'antivirus ne verra rien du tout.
C'est pour cela que je peste contre les cracks. Les bonhommes derrière peuvent aller sur l'ordinateur des crackeurs et injecter des scripts et des programmes offusqués qui passent au travers des antivirus.

Et surtout après les dernières révélations des outils de hacking de equation_group, de wikileaks concernant les outils de la nsa\cia\fbi, qui touchent tous les OS et routeurs, surtout cisco, il faut absolument que les mises à jours soient faites sous Windows, des petits malins s'en servent pour infecter le plus d'ordinateurs.

Cordialement
 
M

Manbo49

alexandre01 a dit:
Aussi le mot de passe de wifi si tu veux. IL faut absolument changer le nom d'utilisateur par défaut et le mot de passe par défaut pour aller à la configuration du routeur, car il y a en ce moment des botnets (réseau de pc infectés qui cherchent à infecter d'autres ordinateurs ou routeurs) qui ont soif d'aventure.
Cliquez pour agrandir...
Excuse moi mais pour le coup jsuis pas tres brancher reseau et routeur ! J'avoue que comme tout le monde je ne bidouille pas ma box. Peux tu m'indiquer ce que je dois faire au juste ?

Sinon oui je peux te dire que je suis désormais definitivement vacciné contre les cracks et autres KMS.... c'est pas rassurant tout ca !
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Manbo49 a dit:
Excuse moi mais pour le coup jsuis pas tres brancher reseau et routeur ! J'avoue que comme tout le monde je ne bidouille pas ma box. Peux tu m'indiquer ce que je dois faire au juste ?
Cliquez pour agrandir...
Cela dépend du modèle du routeur, tu devrais voir ta "box" avec la marque dessus (orange, free, sfr\numéricable).

une recherche sur internet devrait faire l'affaire concernant ton modèle, au pire des cas, si tu ne sais pas vraiment faire, tu me demanderas (vu la variété des modèmes, il n'est pas facile de s'y retrouver.

COrdialement
 
M

Manbo49

Pas de soucis pour la bix, je me renseignerais !

Bon sinon pr le reste jme suis enfin penché un peu plus sur pcsx2 et ca fonctionne nikel...

En qualité normale pas de soucis, en x4 pas de soucis non plus, en x8 avec filtre anisotropic sur 16 bon forcément c'est moins gluide quoi que sans le filtre les cinematiques sont plutot bien fluides... en tout cas le ventilo se met en marche c'est normal puisqu'il doit chauffer un peu mais aucun probleme d'arret brutal ou autre....

Par contre quelque soit la qualité j'ai des ptits artefacts sur l'image fenetrée je suppose que c'est du a l'emulateur et au fait que ce soit de vieux jeux non ?

En tout cas zero bug ou coupure....

Petite question aussi si je repasse sur windows 10 comment le probleme pourrait etre reglé d'un coup ???

Bonne nuit !
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Bonjour Manbo49,

Manbo49 a dit:
En tout cas zero bug ou coupure....

Petite question aussi si je repasse sur windows 10 comment le probleme pourrait etre reglé d'un coup ???
Cliquez pour agrandir...
C'est cela le problème, tu ne sembles ne pas avoir de problème avec Ubuntu, alors qu'auparavant tu avais des problèmes sous WIndows, et on aurait pu penser à un problème matériel.

Or avec quelques tests, tu ne sembles pas avoir des problèmes matériels. Soit cela vient de Windows avec la gestion des pilotes, soit cela vient d'une infection. Si tu veux savoir l'origine des problèmes, on peut tester la réinstallation de Windows 10 pour voir si les problèmes se reproduisent.

COrdialement
 
M

Manbo49

Jvais essayer ca... mais si c' est une infection sue puis-je faire de + qu'un clean all que j'ai deja fait ?
 
alexandre01

alexandre01

Expert sécurité
Modérateur
Modèle
asus s550cm\asus x750 UDR
Vendeur
darty\amazon
Achat
fin 2013\fin 2017
Processeur
i7 3ème génération\I7 8ème génération
Disques
1To disque7200 trs\ 1To disque dur 5400 trs+ssd 250 Go
Mémoire
16 go DDR3\16 Go DDR4
Ecran
1366*768\1920*1080
Système
Arch Linux
Manbo49 a dit:
Jvais essayer ca... mais si c' est une infection sue puis-je faire de + qu'un clean all que j'ai deja fait ?
Cliquez pour agrandir...
Comme tu as fait un clean all, normalement cela devrait-être bon.

j'espère que cela va bien se passer et que Windows ne va pas te buguer après réinstallation de Windows.


COrdialement
 
M

Manbo49

Bon et bien me revoilà sous windows 10... avec les mêmes soucis !! Il a pas fallut 5 min après l'install et le premier demarrage pour que ca coupe net sans BSOD... plusieurs rallumages encore des coupures nettes et pan 1er BSOD tjs pareil "power driver state failure..."

Etant revenu sous windows il y a-t-il quelquechose que je puisse faire pour de nouveaux tests et essayer d'avancer ?

Dépité...


Envoyé de mon iPad en utilisant l\'application Forum des portables
 


Connectez-vous ou inscrivez-vous pour répondre.

 Je "TIP" ce support

0 membres ont lus ce sujet. Plus d'infos

Auteur Sujets similaires Forum Réponses Date
serge152 HELP ! Ecran BSOD sur mon N750JV Asus N et Vivobook N 12
K HELP ! N76VZ sur Win7 : BSOD NETwNs64 qui pointent le pilote WIFI Intel Asus N et Vivobook N 15
R BSOD Windows 8 sur N76VZ Support Windows 8 4
deoaxe64 HELP ! [RC71L] BSOD à répétition entraînant la non détection du SSD Asus G - Autres modèles 2
Xav2211 HELP ! G713PI-LL047 - BSOD réguliers Asus G - Autres modèles 4
D HELP ! Asus TUF Gaming A15 FA506IV + Freeze Ecran Noir Erreurs BSOD Asus TUF 5
Matancy RESOLU [UM325-UA] - BSOD Whea Uncorrectable Error SAV, Droits et Garantie 12
Alex037 HELP ! X71SR ne démarre plus ou aléatoirement + BSoD Asus X 7
J RESOLU [TP410UAR] BSOD sous batterie Support Windows 11 4
Okämi HELP ! F15 FX506LU_TUF566LU - BSOD mise en veille Support Windows 10 5
gibx99 RESOLU [TUF505DV] BSOD, crash et cie Asus TUF 6
Zipper G750 [G750JX T4145H] BSOD Critical Process Died + écran vert Asus G75 - G750 - G751 - G752 - G753 3
Mathis Belpois RESOLU G752VS BSOD memory_corruption_large Asus G75 - G750 - G751 - G752 - G753 10
Satanyka G750 BSOD après upgrade CG 880m → 980m Asus G75 - G750 - G751 - G752 - G753 12
mileulkeul HELP ! [UX331UN] - BSOD WHEA uncorrectable error Asus U - UX - Ultrabook - Zenbook 91
G HELP ! X751LJ _ BSOD après échange de Disque dur Asus X 11
Aresica HELP ! ROG G752VSK - BSOD Asus G75 - G750 - G751 - G752 - G753 16
antiz HELP ! BSOD au bout d'une journée PC NEUF Asus G - Autres modèles 7
ArMenKorn HELP ! BSOD Asus K56CM Support Windows 10 14
B HELP ! [N73SV] BSOD intenpestifs suite à un nettoyage complet Asus N et Vivobook N 4
F HELP ! BSOD - BUGCODE_USB_DRIVER Asus U - UX - Ultrabook - Zenbook 10
M HELP ! N55SF Bsod même après restauration usine Asus N et Vivobook N 2
Nanoxyde HELP ! BSOD: Kernel data inpage error Support Windows 8 4
Lutti G53 [G53JW] BSOD: Processeur instable ? Asus G53 - G531 - G532 25
ReineClaude Ecran Bleu (BSOD) Asus EEE PC - EEE Book - EEE Top - EEE Pad 9
C FERME UX21E -> BSOD au démarrage de Windows 7 (dualboot Ubuntu 12) Asus U - UX - Ultrabook - Zenbook 0
M BSoD N55 Support Windows 7 4
banzai06 1 er BSOD Asus G - Autres modèles 1
E G73 [G73Jw]écran bleu BSOD Asus G73 - G733 6
Killersnake G73JW Problème de BSOD Asus G - Autres modèles 7
D Asus G53 bsod Asus G - Autres modèles 21
E [C90S]Ecrans bleus BSOD[Résolu] Support Windows 7 9
Sakura* [Résolu] [X72JK] BSOD 119. Asus X 3
T bsod stop: c0000221 Asus A - TUF A 7
34APA HELP ! [TP1400KA-BZ077WS] + ne démarre que sur le secteur Asus E et F ou Vivobook E et F 5
Djeneba HELP ! MODELE UM3402Y Son ne fonctionne pas sur la sortie par casque et haut-parleur Asus U - UX - Ultrabook - Zenbook 1
alexandre01 ACTUALITE Microsoft Windows fournira la clef bitlocker aux autorités sur demande Actualité 1
J HELP ! Installation Linux (Ubuntu studio) sur PC (windows non installé) Support Linux 9
Dan001 HELP ! Installer produit adobe sur Vivobook s15 snapdragon x elite ARM Support Windows 11 3
alex2b HELP ! [Zenbook 14 OLED (UM3402)] - Dysfonctionnement sur Ubuntu 24.04.3 LTS Support Linux 20
azussky CONSEIL ACHAT Question générale sur les nouveaux pc portable sur les DD Conseils avant Achat 5
U RESOLU Les touches Page Haut, Accueil, Fin et Page Bas ne fonctionnent plus sur mon ExpertBook P2451FA/Windows 11. Une idée ? Support Windows 11 4
A HELP ! [K6500Z] disque SSD externe samsung T7 non reconnu sur le port USB3 Asus N et Vivobook N 2
adribousq HELP ! Asus Zenbook Duo UX482EA / PC qui démarre uniquement sur batterie et shut down dès qu'il est mis sous tension Asus U - UX - Ultrabook - Zenbook 0
alexandre01 GUIDE Éviter que vos documents sur Word et excel soient synchronisés sur le Cloud de Microsoft Guides et tutoriels Windows 11 0
Y SAV [TUF617NSR-N3038W] litige SAV Asus sur une vis qui a été mise au mauvais endroit SAV, Droits et Garantie 1
EuZèbe HELP ! Vivobook F750QA-BX240T Affichage sur 2 écrans Support Linux 5
alexandre01 ASTUCE Un bug sous GNU\Linux concernant les sauvegardes sur un disque externe Support Linux 0
B RESOLU X751B Impossible de booter sur windows 11 Asus X 1
bruno.ouin UM433I - Plus de son sur le casque Asus U - UX - Ultrabook - Zenbook 9
Sujets similaires



Vos pièces détachées officielles Asus



Guides de démontage en vidéo

Série Asus K556 : comment démonter et changer les haut-parleurs
Série Asus P3540 : comment démonter et changer le touchpad
Série Asus FX53 : comment démonter et changer le touchpad
Série Asus CM5500 : Comment démonter et changer le topcase clavier
Série Asus UM462 : Démontage complet
Asus UX461 : comment démonter et changer le Bottom Case
Série Asus UX31 : Comment démonter et changer les haut-parleurs
Série Asus M515 : comment démonter et changer la carte mère
Série Asus E406 : comment démonter et changer le bottom case
Série Asus E402 : Remontage complet
Série Asus UX301 : comment démonter et changer le touchpad
Série Asus UX533 : Comment démonter et changer le touchpad

L'atelier Asus : études de cas


Ils nous ont confié leur portable.
Découvrez nos rapports d'intervention

CONSULTER

Soutenir le support et les forums

Soutenir les forums Asus

et continuer à recevoir un support de qualité et gratuit.
Objectif
120.00 €
Collecté
0.00 €
Cette campagne s'achève dans
Je soutiens les forums

Register